Burst Pipes (Emergency)
Fast repairs to stop major leaks, prevent damage, and restore water safely.
A burst pipe or major leak can cause serious damage in minutes. Wilkinson Plumbing & Gas provides urgent pipe repairs across the Fleurieu Peninsula and Southern Adelaide. Based in Aldinga, we’re available for emergency call-outs 24/7.
No-obligation free quote. Emergency call-outs 24/7.
Signs of a burst pipe or major leak
- Sudden loss of water pressure
- Water pooling inside or outside the home
- Damp patches, bubbling paint, or water stains on walls/ceilings
- Hissing sounds in walls, floors, or near pipework
- Unexpected spikes in your water bill
- Wet ground around gardens, paths, or near the meter
If you’re unsure whether it’s urgent, call us, and we’ll help you assess the situation.
For dripping taps, running toilets, and minor leaks, see Leaks & Repairs.


What to Do Right Now
If you have a burst pipe
Step 1
Turn off water at the main (if safe)
If water is actively leaking, shut off the water at the main to limit damage. If you can’t locate it, call us, and we’ll guide you.
Step 2
Avoid electrical risks
Keep water away from power points and appliances. If water is near electricity, stay clear and don’t touch switches until it’s safe.
Step 3
Call us for urgent attendance
Call now, and we’ll attend as soon as possible. We’ll isolate the leak, repair the pipework, and check the system before restoring water.
How We Can Help
Reliable repairs for burst pipes and major leaks
We respond quickly to isolate the issue and complete repairs safely. Our focus is to stop the leak, minimise damage, and get your water supply back up and running as soon as possible.
What we can help with:
- Burst water pipes and active leaks
- Leaks under driveways, paths, or in gardens
- Faulty valves and pipe connections
- Emergency isolation and temporary stabilisation where required
- Pipe repairs and replacement of damaged sections
- Post-repair checks to ensure everything is operating safely
Need urgent help? Call now and we’ll get you sorted.

Our Repair Process
Step 1
Assess and isolate
We locate the leak source and isolate the affected section to stop further water loss and damage.
Step 2
Locate the cause
If the source isn’t obvious, we’ll investigate the likely cause (failed join, movement, corrosion, pressure issues) and confirm the best repair approach.
Step 3
Repair, test and restore
We complete the agreed repair, pressure-test where appropriate, and make sure the system is functioning correctly before restoring water.
How to help prevent burst pipes
Some burst pipes happen without warning, but there are a few practical steps that can reduce the risk of major leaks and water damage.
Tips:
- Know where your main water shut-off is and make sure it’s accessible
- Fix small leaks early before they worsen (see Leaks & Repairs)
- Watch for water hammer (banging pipes) or sudden pressure changes
- Keep gutters and stormwater flowing to reduce overflow and pooling near pipework
- If you’ve had repeat issues, book an inspection to check ageing or vulnerable pipe sections
Not sure what’s causing it? We can assess and advise on the most practical fix.
Why pipes burst or leak
Burst pipes and major leaks are often caused by underlying issues in the pipework or fittings.

We’ll explain what caused the issue and what to do next to reduce the chance of a repeat problem.
Ageing or deteriorating pipework
Failed joints, fittings, or valves
Movement in the ground or building settlement
High water pressure or water hammer
Corrosion (in older pipe materials)
Accidental damage during digging or renovations
Service Areas
Burst pipe plumber near you
Based in Aldinga, we service the Fleurieu Peninsula and Southern Adelaide within a 30km radius — including Aldinga, Sellicks Beach, Nairne, McLaren Vale, Port Willunga, and nearby areas.
Trusted Local Plumbers
See what locals are saying about Wilkinson Plumbing & Gas.
See what locals are saying about Wilkinson Plumbing & Gas.
Ariana Van Den Brink
...fixed our water leak ... his work was exemplary... very friendly and courteous... would definitely recommend Phil...
Read MoreGlenn Wells
Had Phil install gas to my Motorhome build. It was hard to find anyone who could do this work & Phil researched what was required for ventilation, products... Happy to recommend him & enjoyed his help & support & was reasonably priced as well.
Read MoreLaurie Broomhead
We have used Phil several times over the past couple of years to replace aged toilet cisterns, install new taps and water filters. Recently we had need to replace our old water heater and Phil did it in quick time, with little notice. At all times Phil has been professional, efficient and responsive to our needs. If you are looking for a plumber that does high quality work, with minimal fuss give Phil a call.
Read MoreAdam Luscombe
This is an excellent service! Highly recommended for anyone looking for quality and professionalism.
Read MoreFrequently Asked Questions
How quickly can you attend for a burst pipe?
We prioritise urgent leaks and burst pipes. Call us and we’ll confirm the earliest available attendance time.
Is a leaking pipe an emergency?
It can be. If water is pooling, the leak won’t stop, or water is near electrical points, treat it as urgent and call straight away.
Do you repair leaking taps and toilets?
Yes — but those are best covered under our Leaks & Repairs service for non-urgent issues.
Do you guarantee your work?
Yes — we stand by our workmanship and will explain what’s covered before we start.
Need help with a burst pipe or major leak?
Call Wilkinson Plumbing & Gas for fast repairs and a no-obligation free quote.
